Click image to view full size image
5 ㎡stainless steel 304 industrial freeze drying equipment For durian
Description:
The Dry case is designed according to vacuum vessel of international standard. Case shape is horizontal cylinder. Exterior has multitasked stiffener to strengthen. Test the vacuum air impermeability after welding. Silicone rubber is used to seal between the drying case and the case door. Sight glass with light is set on the door. Hanger rail is set on the drying case to take the products get in and out.
****Structure horizontal cylinder with stiffener Design standard vacuum vessel design
****Material: SUS or Q235A Leakage rate 25Pa×L/S (depend on Clients requirement)
Food industry:
Vacuum freeze-drying can be used in the drying vegetables, meet, fish, condiment instant food and specialties, keeping the food’s original fresh look, smell, taste, shape. The freeze-dried products can regain water competently can be easily longer stored and less-costly transported .
Nutrition and health care industry:
Vacuum freeze-dried nurture products such as Royal jelly, ginseng, terrapin, rainworm etc are more natural and original.
Biomedicine research:
Vacuum freeze-drying can long-term store blood, bacteria, artery, bones, skin, cornea, nerve tissue and organs etc which can regain water and rebirth competently.
Fruit and vegetable vacuum pre-cooling device for fruits and vegetables after harvest, is energy saving, efficient pre-cooling device. Cold precooling time can be shortened to 1/20 ~ 1/30, just 20 to 30 minutes, and cooling evenly, low energy consumption.
Its main features are as follows:
Pollution-free production process, even cooling, available thick cardboard box packaging;
In addition to the water rate of less than 5%, no local dry or frozen phenomenon;
Constant water capture, can remove excess moisture, to maximize the freshness;
Automated intelligent control of the process parameters. Feed the door closed just press the "days" button, the entire pre-cooling process automatically.
Do not send fat: rehydration speed, do not have a long time system, saving time and effort.
Light weight: low water content, no salt, no added.
Pure natural: to maintain the natural fresh sea cucumber color, smell, taste, shape and nutritional content.
Eat new ways: you can eat dry, you can also re-cold salad, porridge and cooking.
Easy to store: Due to low water content, pathogenic bacteria can not survive, can be long-term preservation.
Freeze-dried sea cucumber Advantages: After freeze-dried sea cucumber water content will not exceed 3%;
Do not add any other ingredients, consumers distinguish between good, frivolous ingredients.
Sea cucumber nutrition is not lost, so that the key nutrients in the sea cucumber and more retained more than 30%.
Due to complete dehydration, the product can be stored at room temperature for more than 5 years without adding any preservatives.
Specifications:
|
ZG-5㎡ |
||
|
Construction |
Technical parameters |
Remark |
|
Base Structure |
||
|
Effective area of shelves |
5㎡ |
|
|
Input capacity |
50kg |
|
|
Maximum Condenser capacity |
60Kg/batch |
|
|
Power supply |
380V/50Hz/3P |
According to client’s voltage |
|
Power consumption |
23.75Kw |
|
|
Cooling Water |
5T/Hr(T＜28℃, P=0.1-0.15MPa) |
Recyclable |
|
Machine size（L*W*H） |
2700*1200*2430mm |
subject to the actual design |
|
Main Structure |
Unity type |
|
|
Weight |
3000 Kg |
|
|
Dry Chamber |
||
|
Dry Chamber Material |
SUS304/ 6mm thick |
|
|
Dry Chamber Shape and dimension |
Cylinder φ1100*1100 |
|
|
Door lock |
Hand knob lock |
|
|
Door Open direction |
Right to left |
Decided by customer |
|
Open angle |
＞110° |
|
|
Door material |
SUS304 |
|
|
Surfaceness |
Ra≤0.5um |
|
|
Observation window |
Frost-resistant glass |
Installed on the front |
|
Door seal |
Medical o section silicone rubber seal |
|
|
Temperature sensor |
T-type thermocouple |
|
|
Shelves |
||
|
Shelf material |
SUS304 |
|
|
Shelf Surfaceness |
Ra≤0.5um |
|
|
Shelf quantity.（pc） |
7+1 layers |
The top layer of the shelves is temperature compensation |
|
Stainless steel tray |
Hangzhou KASSEL 395*445*30/ 2mm thick |
28pcs |
|
Distance between shelves |
75 mm |
|
|
Shelf dimension（L*W*H） |
800*895*15mm |
|
|
Shelf lowest temperature |
-55℃ |
|
|
Shelf highest temperature |
+70℃ |
|
|
Shelf Cooling Rate |
+20~-40℃≤60min |
No-load |
|
Heating power consumption |
8 Kw/380V/50Hz |
|
|
Shelf fence |
prevent the tray cross over the shelf |
|
|
Condenser |
||
|
Condenser Material |
SUS304/ 6mm thick |
|
|
Shape and dimension |
cylinder φ1100*600 |
at back of dry chamber |
|
Coil pipe material |
SUS304 |
|
|
Coil shape |
Circular coil pipe |
|
|
Coil pipe water catching area |
≥6㎡ |
|
|
Refrigerant |
R404a |
|
|
Condenser lowest temperature |
-65℃ |
|
|
Cooling rate |
+30~-40℃≤30min |
|
|
Observation Window |
Frost-resistant glass |
Installed on the side |
|
defrosting method |
spray + immersion |
|
|
Temperature sensor |
T-type thermocouple |
|
|
Refrigerating Unit |
||
|
Compressor. |
BITZER 12.2HP two-stage motor |
1set |
|
Power consumption |
9.15Kw |
|
|
Refrigerant |
R404a |
|
|
Shelf temperature uniformity |
+/-1℃ |
|
|
Oil separator |
Shengzhou Jinhao |
1set |
|
Oil Filter |
Shengzhou Jinhao |
1set |
|
Oil pressure differential controller |
Shanghai Fengshen |
1set |
|
Gas-liquid separator |
Shengzhou Jinhao |
1set |
|
Dehumidification drying filter |
Shengzhou Jinhao |
1set |
|
Manometer |
Shengzhou Jinhao |
3set |
|
High/low voltage protection relay |
Danfoss (Danmark) |
1set |
|
Water cooled condenser |
Zhejiang Kaidi |
1set |
|
Corrugated Damping Pipe |
Shengzhou Jinhao |
2pcs |
|
Manual stop valve |
Shengzhou Jinhao |
1set |
|
Refrigerating solenoid valve |
Emerson (America) |
1set |
|
Expansion valve |
Danfoss (Danmark) |
1set |
|
Red Copper Pipe |
φ16、φ12、φ10 |
|
|
Refrigeration Return-pipe |
φ38 Stainless steel seamless pipe |
|
|
Vacuum System |
||
|
Vacuum Pump |
LEYBOLD D30C 1.5KW |
2sets |
|
Roots vacuum pump |
LEYBOLD WAU251 1.1KW |
1set |
|
Corrugated pipe |
Φ76 |
Vacuum Pipe Shock Resistance |
|
Pump air flow |
100L/S |
|
|
Power consumption |
4.1Kw |
|
|
Butterfly valve |
Ningbo GI-63 |
|
|
vacuum solenoid valve |
Ningbo DDC-40 |
Automatic open or close with vacuum pump |
|
vacuum gauge |
Shandong ZJ-54D |
|
|
Final vacuum |
≤1Pa |
No-load |
|
Pumping rate |
From the atmospheric pressure dropped to 133 Pa≤20min |
|
|
System leakage rate |
0.005 Pa.m3/sec |
|
|
Circulation System |
||
|
Pipe material |
304 seamless pipe |
|
|
Circulation pump |
Denmark Grundfos 1.1KW |
1set |
|
Power consumption |
9.1 Kw |
|
|
Ball valve |
Shanghai DG40 |
Comply with the standard of Q/IAKX002-97 |
|
Circulating fluid |
Multiple fluid |
|
|
Heat exchanger |
ALFA LAVAL (Sweden) |
1set |
|
Heating rate |
＞1℃/min |
|
|
Heating method |
Electric Heating pipe 4KW*2pcs 8Kw |
|
|
Control method |
Manual/Auto control |
|
|
Circulating fluid tank dimension |
￠300*400 |
|
|
Control system |
||
|
System Monitoring Software |
KASSEL |
1set |
|
Vertical control cabinet |
Hangzhou Shuanglong |
Control，record |
|
PLC |
SIEMENS CPU 226 CN AC/DC/relay |
1set |
|
Thermocouple extension module |
SIEMENS EM 231 CN 4（4 TC） |
1set |
|
Analog input module |
SIEMENS EM 231 CN（4 AI） |
1set |
|
HMI |
Taiwan PanelMaster |
1set |
|
Cable of HMI and PLC |
KASSEL |
|
|
Constant current |
KASSEL |
1 |
|
Switching Power Supply |
Taiwan MW companies / 24V/5V |
24V 1pc |
|
Temperature sensor |
T-type thermocouple |
Temperature sensor |
|
vacuum gauge |
Shandong ZJ-54D |
2 |
|
AC contactor |
SCHNEIDER (Germany) |
|
|
Air-break |
SCHNEIDER (Germany) |
|
|
Electric wire |
10㎡、6㎡、4㎡、2㎡、1㎡ |
|
Competitive Advantage:
1) We have applied the CE, ISO9001 certificate for our products and get the good technical test report, who is the international famous third party test institute.1) Our products are designed and produced completely according to European standard, which are oriented as high efficiency and high quality.
2) We have applied the CE, ISO9001 certificate for our products and get the good technical test report, who is the international famous third party test institute.
If the 5 ㎡stainless steel 304 industrial freeze drying equipment for durian caters to your requirement, welcome to buy the precise equipment made in China from our factory. We are one of the professional manufacturers and suppliers in China who can offer you unmatched services and prices. And the customized service is also available. Don't hesitate any more.
http://www.kassel-temperaturecontroller.com/